š Free Worldwide Shipping on All Orders!Shop Now
Nofaya Alcohol Tester with LED HD Display Blowing Type 150mAh | NF-AT68
ļ»æ
Overview:
Instructions for use:
1. Power on Press and hold the power on button for 1 second, after a beep, the LCD screen of the tester will start. 2.
2. Preheat: The āPreheatā character appears on the display and the number in the upper left corner starts counting down from 10 to 00. 3.
3. Blow test: After the āwarm-upā is completed, the tester enters the āblowā state and the blow character appears on the display, with the numbers counting down from 10 to 00. Blowing within this countdown time, the machine senses the gas, and the buzzer ābeepā is prompted to stop blowing. 4.
4. Display of results: The test results are read on the display. Press and hold the power button for 1s to switch the unit, i.e. the unit flashes after the value, press and hold again for 1s to exit.
5. 10s after the test result is displayed the unit automatically switches off. Switch on again for the next test.
Test result description:
ļ»æ
1. If the result alcohol concentration is 0mg/L, the warning light will not respond.
2. If the alcohol concentration is >0mg/L and <0.15mg/L, a āsafeā character appears on the display, and the green warning light flashes.
3. If the alcohol concentration is ?0.15mg/L and <0.25mg/L, a āwarningā character appears on the display, and the yellow warning light flashes, accompanied by a ābeepā tone.
4. If the result alcohol concentration is ?0.25mg/L, the character āDangerā appears on the display, the red warning light flashes, and a ābeepā beeps.
ļ»æ
Features:
Ā
- Model: AT68
- Sensor Type: Semiconductor-type sensor
- Display: LED display
- Housing material: ABS plastic
- Test range: 0.00-0.19% BAC (0-0.95mg/l)
- Measurement units: mg/l(BrAC), m/l(BAC), %BAC, mg/100ml
- Measurement mode: Quick check, automatic detection
- Measurement time: 10 seconds
- Power supply: Built-in rechargeable lithium polymer battery
- The battery used: 3.7V 150mAh
- Power adapter requirement: DC5V 1A
- Charging current: 180mA
- Operating temperature: 0-45Ā°C
- Warm-up time: 10 seconds
- Blow time: within 10 seconds, >4 seconds required
- Reaction time: less than 5 seconds
ļ»æ
Ā
ļ»æ
ļ»æ
ļ»æ
ļ»æ
ļ»æ
ļ»æ
ļ»æ
ļ»æ
ļ»æ
ļ»æ
ļ»æ
$9.57
Nofaya Alcohol Tester with LED HD Display Blowing Type 150mAh | NF-AT68ā
$9.57
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
ļ»æ
Overview:
Instructions for use:
1. Power on Press and hold the power on button for 1 second, after a beep, the LCD screen of the tester will start. 2.
2. Preheat: The āPreheatā character appears on the display and the number in the upper left corner starts counting down from 10 to 00. 3.
3. Blow test: After the āwarm-upā is completed, the tester enters the āblowā state and the blow character appears on the display, with the numbers counting down from 10 to 00. Blowing within this countdown time, the machine senses the gas, and the buzzer ābeepā is prompted to stop blowing. 4.
4. Display of results: The test results are read on the display. Press and hold the power button for 1s to switch the unit, i.e. the unit flashes after the value, press and hold again for 1s to exit.
5. 10s after the test result is displayed the unit automatically switches off. Switch on again for the next test.
Test result description:
ļ»æ
1. If the result alcohol concentration is 0mg/L, the warning light will not respond.
2. If the alcohol concentration is >0mg/L and <0.15mg/L, a āsafeā character appears on the display, and the green warning light flashes.
3. If the alcohol concentration is ?0.15mg/L and <0.25mg/L, a āwarningā character appears on the display, and the yellow warning light flashes, accompanied by a ābeepā tone.
4. If the result alcohol concentration is ?0.25mg/L, the character āDangerā appears on the display, the red warning light flashes, and a ābeepā beeps.
ļ»æ
Features:
Ā
- Model: AT68
- Sensor Type: Semiconductor-type sensor
- Display: LED display
- Housing material: ABS plastic
- Test range: 0.00-0.19% BAC (0-0.95mg/l)
- Measurement units: mg/l(BrAC), m/l(BAC), %BAC, mg/100ml
- Measurement mode: Quick check, automatic detection
- Measurement time: 10 seconds
- Power supply: Built-in rechargeable lithium polymer battery
- The battery used: 3.7V 150mAh
- Power adapter requirement: DC5V 1A
- Charging current: 180mA
- Operating temperature: 0-45Ā°C
- Warm-up time: 10 seconds
- Blow time: within 10 seconds, >4 seconds required
- Reaction time: less than 5 seconds
ļ»æ
Ā
ļ»æ
ļ»æ
ļ»æ
ļ»æ
ļ»æ
ļ»æ
ļ»æ
ļ»æ
ļ»æ
ļ»æ
ļ»æ
